A To Z MICRO-TECHNOLOGIES, INC.
PO BOX 1115
LITTLE RIVER, SC 29566
http://www.atozmicro.com
All prices and stock are current as of: Tuesday 21 October, 2014
Displaying 1081 to 1140 (of 1687 products) Result Pages:[<< Prev]   1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  [Next >>] 

Solar String Lights (Clear(
 Solar String Lights (Clear(

MSRP: $45.00

 

Create a warm, charming accent with this solar rope light as well as provide practical illumination to a railing or walkway! The solar rope light fully charges with six to eight hours of daylight and automatically turns on at dusk to provide up to 8 hours of light. Comes with a ground spike and mounting hardware.
  • 50 long-life white LED lamps inside a weatherproof sleeve
  • Runs up 8 hours on a full charge
  • Amorphous silicon solar panel recharges in 6 to 8 hours of daylight
  • Ground spike and mounting hardware included

Illuminate railings and walkways

Drop Ship Price: Vendors please log-in
Model Number: 1100 First AvailableWednesday 31 October, 2012

AZM 1.5 WATT SOLAR BATTERY CHARGER
 AZM 1.5 WATT SOLAR BATTERY CHARGER


MSRP: $44.99

Converts Solar Energy into DC Current

  • Super high output will keep all batteries fully charged!
  • Use with auto, marine, truck, RV--any 12 volt battery.
  • No installation--simply plugs into the cigarette lighter.
  • Compensates for small steady battery drains.
  • Mounts to dash or visor.
Drop Ship Price: Vendors please log-in
Model Number: 0369 First AvailableSaturday 08 September, 2007

AZM FLOATING SOLAR FOUNTAIN PUMP
 AZM FLOATING SOLAR FOUNTAIN PUMP


MSRP: $69.99

Works all day in direct sunlight. No wiring needed.Three piece sprinkler head with 7 or 12 hole shower and fountain nozzle.

  • 19.6'' lift
  • Automatic on/off switch
  • Includes filter

1.6 watts/9 volts; Overall dimensions: 12.59'' diameter, 3.85'' high

Drop Ship Price: Vendors please log-in
Model Number: 0370 First AvailableSaturday 08 September, 2007

AZM SELF POWERED ECO-FAN
 AZM SELF POWERED ECO-FAN
  • Uses the heat of the wood stove to generate it's own electricity
  • Starts and stops itself as the stove warms up or cools down
  • The hotter the stove gets the faster the fan will go
Operating temperature range: 150° F-700° F; Maximum airflow: 150 CFM
Drop Ship Price: Vendors please log-in
Model Number: 0390 First AvailableTuesday 11 September, 2007

AZM SOLAR BATTERY CHARGER
 AZM SOLAR BATTERY CHARGER

MSRP: $ 129.99

Let nature's infinite power source keep your battery fully charged. Use with auto, marine, truck, RV--any 12V battery. Compensates for small steady battery drains. LED indicator. Mounts to dash or visor.

  • 5 watts
  • 18''L x 12-1/2''W x 1''H
Drop Ship Price: Vendors please log-in
Model Number: 0371 First AvailableSaturday 08 September, 2007

AZM Solar Bug Killer
 AZM Solar Bug Killer

MSRP: 42.95

Solar powered mosquito killer kills mosquitoes so that people can retake control of their yards and enjoy the outdoor day or night without the fear of being eaten alive.

  •  Good to be used at home, on picnic table, in tent, under the roof or applications alike
  •  Powered by built-in 2 pieces of 70X70mm Amorphous solar cell 2 X 1.2V/900mAh rechargeable batteries
  •  Use blue light to attract Mosquito, Gnata, other small insects that fly, and kill them with the high voltage metal net around the light
  •  Plastic fence design to prevent children from touching the metal net
  •  Comes with plastic base & hanger for easy use

 

Drop Ship Price: Vendors please log-in
Model Number: 0377 First AvailableSaturday 08 September, 2007

AZM Solar Cell Phone Charger
 AZM Solar Cell Phone Charger

(0) Remaining, Discontinued

 

Msrp: $89.95

Not just a solar charger—this device is also a lithium ion battery that may be charged by solar power or with the AC adapter.
 

  • Also great for MP3 and MP4 players (including iPods), PDAs, digital cameras, and other handheld electronic devices
  • Fully charged in 4-6 hours, and can charge a cell phone in 1-2 hours
  • 1000 mAh
  • Compact design is easy to take anywhere
  • LED charge indicator
  • Includes 5 adapters that will fit Nokia, Samsung, Motorola, LG and other cell phones; MP3 and MP4 players; and PDAs


Solar cell: 80 mA/120mA; Overall dimensions: 3-1/4" L x 2-1/4" W x 3/4" H (closed)

 

Drop Ship Price: Vendors please log-in
Model Number: 0849 First AvailableSunday 11 January, 2009

AZM SOLAR INSECT KILLER WITH LIGHT
 AZM SOLAR INSECT KILLER WITH LIGHT


MSRP: $59.95

Lantern style lamp kills mosquitos and small insects attracting them to the ultra violet light.

  • Runs up to 8 hours on a fully charged battery
  • Also makes a great solar garden light

Batteries included; Overall dimensions: 5-7/8"L x 5-7/8"W x 6-1/8"

Drop Ship Price: Vendors please log-in
Model Number: 0360 First AvailableFriday 07 September, 2007

AZM SOLAR LIGHTUP HOUSE ADDRESS
 AZM SOLAR LIGHTUP HOUSE ADDRESS

MSRP: $69.99

This handsome copper-finish number box lights up at night to help guests easily find your house at night.Comes with five pieces of each number (0 through 9).

  • Easy installation, no wiring!
  • Recharges automatically during the day using solar power
  • Spaces and numbers for a 5 digit address
  • Bright, super long-life LED lamps
  • Brass frame, poly reflector board and protective cover
  • Includes wall bracket mount

Numbers are 2-3/8'' high; Overall dimensions: 8-3/4'' W x 4-5/8'' H x 1-1/4'' deep

Drop Ship Price: Vendors please log-in   Vendors please log-in
Model Number: 0372 First AvailableSaturday 08 September, 2007

AZM SOLAR MOLE CHASER
 AZM SOLAR MOLE CHASER

MSRP: $44.95

Drives away burrowing pests, moles and gophers in minutes.

  • Works day and night
  • Emits sonic tone every 30 seconds
  • Covers 6000 square feet
  • Environmentally friendly, no electricity required
  • Length: 15in.
Drop Ship Price: Vendors please log-in   Vendors please log-in
Model Number: 0368 First AvailableSaturday 08 September, 2007

AZM Solar Portable Power Charger
 AZM Solar Portable Power Charger
Universal Portable Solar Charger for any Phone that Supports Charging via a USB Data Cable. Black Color, Portable Solar Charges Cell Phones, iPod, iPhone, and other
5V Personal Electronics by sunlight and electricity with built-in 2000mAh Lithium Battery.
  • Dual USB Ports to Charge TWO Electronic Devices at the Same Time.
  • Utilizes High Quality Solar Panel or charge via the Included Retractable USB Cable.
  • Intelligent protection PCBA: Protection for Overcharge, Over-Discharge, Overload and Short Circuit Protection.
  • Small, Compact Design! Weighs only 102 grams and is Only 120mm x 64mm x 15mm.
Drop Ship Price: Vendors please log-in
Model Number: 67788 First AvailableSunday 18 July, 2010

AZM SOLAR POWER GABLE VENT
 AZM SOLAR POWER GABLE VENT

Msrp: $499.95

Solar Gable Vents are easy to install, reduce heat build up in your attic, save energy costs and prolong the life of your roof.

  • 10 Watt Panel
  • up to 850 CFM
  • Reduces Energy Costs and saves money
  • Mounts under your gable inside the attic
  • Blows hot air out side and cools attic
  • Helps prolong life of the roof and Shingles
  • Moves more air compared to any other 10W panel system
  • Depth (in.) : 11.25 in
  • Height (in.) : 18 in
  • Width (in.) : 17.25 in
Drop Ship Price: Vendors please log-in
Model Number: 0375 First AvailableSaturday 08 September, 2007

AZM Solar Powered Fountain Pump
 AZM Solar Powered Fountain Pump

MSRP: $79.99

Save yourself some energy by utilizing the power of the sun to pump water through your already existing or newly created pond/water display.

  • Max. water lift height: 2.62 ft.
  • Max. flow rate: 42 gallons per hour
  • Can power your remote project where previous energy was not available
  • Kit contains several tip heads for a wide variety of spray styles
  • Includes: (1) submersible pump, (1) solar panel, (4) fountain heads, (3) nozzle adapters, and (4) nozzle extension tubes
  • Peak power of solar panel: 1.2 watt
  • Operative voltage: 7 volts

Solar panel dimensions: 4-3/4" L x 4-3/8" W x 5/8" H
Submersible pump dimensions: 2-1/2" L x 1-3/8" W x 1-15/16" H
Assembled dimensions: 2-1/2" L x 1-3/8" W x 11-1/4" H
Cable length: 16 ft.

 

 

Drop Ship Price: Vendors please log-in
Model Number: 0973 First AvailableMonday 25 July, 2011

AZM Solar Powered Garden Candle Lantern
 AZM Solar Powered Garden Candle Lantern

MSRP: $35.00

 

  • No wiring needed!
  • LED candlelight resembles a flickering candle
  • Lamp lasts up to 100,000 hours
  • Durable poly crystalline solar panel
  • Easy to install

Comes with garden stake and two AA rechargeable NiCd batteries.

Automatic on/off switch
Overall dimensions: 24-5/8" H

 

Drop Ship Price: Vendors please log-in
Model Number: 0976 First AvailableMonday 25 July, 2011

AZM SOLAR ROOF MOUNT POWER VENT
 AZM SOLAR ROOF MOUNT POWER VENT

MSRP: $399.99

Solar Powered Roof Exhaust vents work with your existing soffit intatke to help remove hot, stale attic air. No extra wiring required.

  • Reduces Energy Costs and saves money
  • Helps to prevent wood rot and extends the life of yoru exterior paing
  • Solar powered to eliminate utility costs
  • Helps prolong life of the roof and Shingles
  • 500 CFM.
  • Requires a 15 inch diameter hole for installation.
  • Tested to withstand 110 MPH wind driven rain.
  • Solar panel is hail and foreign object impact resistant.
  • Brushless motor.
  • Extra wide flashing.
  • Environmentally friendly operation.
  • One unit handles approximately 800 square feet of attic.
Drop Ship Price: Vendors please log-in
Model Number: 0374 First AvailableSaturday 08 September, 2007

SCK-200 ANYCOM Bluetooth Solar Car-Kit
 SCK-200 ANYCOM Bluetooth Solar Car-Kit

Msrp:$ 99.99

  • Mounts to the windshield
  • Up to 15 hours talk time
  • Up to 25 days standby
  • DSP with noise- /echo-cancellation
  • 95 dB speaker
  • USB charging cable with 12/24 car charger
  • BT 2.0

 

Drop Ship Price: Vendors please log-in
Model Number: 856553000581 First AvailableSunday 31 August, 2008

13 HP OHV HORIZONTAL SHAFT GAS ENGINE
 13 HP OHV HORIZONTAL SHAFT GAS ENGINE
  • Electric start with manual backup
  • 17 ft lbs torque at 2500 RPM
  • Durable cast iron cylinder
  • Ball bearing support shaft for longer service life
  • Low oil shutdown
  • Fuel shutoff for safe transport
  • EPA and CARB certified

389 cc, 4 stroke, 8:1 compression ratio; Shaft size: 1" diameter x 2-7/8" L; Shaft thread: 3/8"-24 UNF with 1/4" keyway; 6.5 liter fuel capacity

Drop Ship Price: Vendors please log-in
Model Number: 0401 First AvailableThursday 13 September, 2007

5 1/2 HP Gas Engine Pump
 5 1/2 HP Gas Engine Pump

High performing 5 1/2 HP gas engine pump is an easily portable unit suppllied with rugged carrying handle. Ideal for water transfer in remote locations. This pump is also excellent for floodwater removal when power source is out. The pump can supply water to remote irrigations sites where water lines are not available. Supplied with manual choke, fuel valve and engine shut-off controls. Capable of pumping up to 8,460 gallons per hour.

  • Highperforming 5 1/2 HP gas engine pump
  • Pumping capacity up to 8,460 gallons per hour
  • Easily portable unit supplied with carrying handle
  • 1 Year Warranty
Drop Ship Price: Vendors please log-in
Model Number: 0410 First AvailableThursday 13 September, 2007

6.5 HP HORIZONTAL SHAFT OVERHEAD VALVE GAS ENGINE
 6.5 HP HORIZONTAL SHAFT OVERHEAD VALVE GAS ENGINE

Features gas saving overhead valves for cooler, cleaner running and longer life.

  • Cast iron cylinder sleeve
  • Low oil shut down
  • Fuel shut off for safe transport
  • Ball bearing support shaft for increased durability
  • EPA and CARB certified

6.5 HP, 3600 RPM, Four stroke; Recoil start, Electronic ignition, 3.6 liter fuel tank, Engine displacement: 196 cc, 3/4'' straight keyed shaft, Key way: 3/16

Drop Ship Price: Vendors please log-in
Model Number: 0400 First AvailableThursday 13 September, 2007

GAS POWERED ROAD SWEEPER
 GAS POWERED ROAD SWEEPER

Use this heavy duty road sweeper to easily clean sidewalks and driveways, or even clear away snow!

  • Two brushes attached side-by-side
  • Rigid caster front wheels
  • Pneumatic rear wheels with tractor wheel tread
  • Spark plug wrench included
  • Gas operation
  • 7.5 hp

Spark plug wrench included. Brush dimensions: 15" diameter x 25" L; Tire load capacity: 300 lb. @ 30 PSI; Overall dimensions: 65-1/4" L x 24-1/8" W x 44-1/4" H

Drop Ship Price: Vendors please log-in
Model Number: 0543 First AvailableMonday 29 October, 2007

AZM 1 HP AGRICULTURAL MOTOR
 AZM 1 HP AGRICULTURAL MOTOR

25% More Starting Power

Use this motor as a replacement on conveyors, fans, elevators, grinders and pumps. Internal automatic power switch - snap action power switch for high starting torque.

Features a totally enclosed fan cooled housing with manual thermal protection, durable rigid base, single phase-capacity starter. 1.15 service factor.
  • Horsepower: 1
  • Frame: 56
  • Shaft Diameter: 5/8''
  • Volts: 115/208-230
  • Full load amps: 13.4/6.8-6.7
  • Phase: single
  • Enclosure: Open dripproof
  • Maximum speed: 1800 RPM
  • Reversible: yes
  • Service factor: 1.15
Drop Ship Price: Vendors please log-in
Model Number: 0406 First AvailableThursday 13 September, 2007

AZM 1 HP INDUSTRIAL/COMMERCIAL MOTOR
 AZM 1 HP INDUSTRIAL/COMMERCIAL MOTOR  Use this motor as a replacement unit for everything from compressors to milking machines--any application requiring high torque. Features capicitor start, a durable rigid base and reversible rotation.
  • Horsepower: 1
  • Frame: 56
  • Shaft Diameter: 5/8''
  • Volts: 115/230
  • Full load amps: 13.6/6.8
  • Phase: single
  • Enclosure: Open dripproof
  • No load speed: 1725 RPM
  • Reversible: yes
  • Service factor: 1.0
Drop Ship Price: Vendors please log-in
Model Number: 0407 First AvailableThursday 13 September, 2007

AZM 1/3 HP HEAVY DUTY ELECTRIC MOTOR
 AZM 1/3 HP HEAVY DUTY ELECTRIC MOTOR  Replace motors in blowers, sanders, saws, conveyor belts, and other benchtop tools. Capacitor start, 4 pole.
  • Frame: 48
  • Shaft diameter: 9/16''
  • Totally enclosed, fan cooled
  • Open dripproof enclosure
  • Reversible
  • Service factor: 1.15
  • Front and rear ball bearings
115 volts, single phase; 5.5 amps under full load; Maximum speed: 1725 RPM
Drop Ship Price: Vendors please log-in
Model Number: 0408 First AvailableThursday 13 September, 2007

AZM 1/4 HP HEAVY DUTY ELECTRIC MOTOR
 AZM 1/4 HP HEAVY DUTY ELECTRIC MOTOR  Replace motors in blowers, sanders, saws, conveyor belts, and other benchtop tools. Capacitor start, 4 pole.
  • Frame: 48
  • Shaft diameter: 9/16''
  • Totally enclosed, fan cooled
  • Open dripproof enclosure
  • Reversible
  • Service factor: 1.15
115 volts, single phase; 5.5 amps under full load; Maximum speed: 1725 RPM
Drop Ship Price: Vendors please log-in
Model Number: 0409 First AvailableThursday 13 September, 2007

AZM 2 HP HOME/HOBBYIST MOTORS
 AZM 2 HP HOME/HOBBYIST MOTORS  This motor is the perfect replacement part for light duty air compressors, steam cleaners (both portable and stationary) and other machinery requiring high starting torque with low amp draw.
  • Horsepower: 2 HP
  • Frame: 56
  • Shaft Diameter: 5/8''
  • Volts: 115/230
  • Full load amps: 19.6/9.8
  • Phase: single
  • Enclosure: Open dripproof
  • No load speed: 3450 to 3600 RPM
  • Reversible: yes
  • Service factor: 1.0
Drop Ship Price: Vendors please log-in
Model Number: 0405 First AvailableThursday 13 September, 2007

AZM 2 HP SINGLE PHASE ELECTRIC MOTOR
 AZM 2 HP SINGLE PHASE ELECTRIC MOTOR

Enclosed for outdoor use.

Use this motor for continuous-running applications, ranging from conveyors and fans to pumps and barn cleaners.

Capacitor start. Manual reset button.
  • Horsepower: 2
  • Frame: 145T
  • Shaft diameter: 7/8''
  • Volts: 115/208-230
  • Full load amps: 20/10.8-10
  • Phase: single
  • Enclosure: Totally Enclosed Fan Cooled
  • Maximum speed: 1800 RPM
  • Reversible: yes
  • Weight: 50 lbs.
Drop Ship Price: Vendors please log-in
Model Number: 0403 First AvailableThursday 13 September, 2007

AZM 3/4 HP GENERAL PURPOSE ELECTRIC MOTOR
 AZM 3/4 HP GENERAL PURPOSE ELECTRIC MOTOR

Replace the Motor, Not the Machine!

Replace motors in blowers, sanders, saws, conveyor belts, and other benchtop tools. Single phase - capacitor start, 4 pole. Durable rigid base.
  • Horsepower: 3/4
  • Frame: 56
  • Shaft diameter: 5/8''
  • Volts: 115/230
  • Full load amps:10.9/5.45
  • Enclosure: open, dripproof
  • Maximum speed: 1725 RPM
  • Reversible: yes
  • Service factor: 1
  • Weight: 24.3
Drop Ship Price: Vendors please log-in
Model Number: 0404 First AvailableThursday 13 September, 2007

AZM 5 HP HEAVY DUTY COMPRESSOR MOTOR
 AZM 5 HP HEAVY DUTY COMPRESSOR MOTOR


1.15 SERVICE FACTOR

Great for compressors, pumps, fans, and other applications where dirt and moisture are minimal. Ball bearings.

  • Phase: single
  • Enclosure: Open drip-proof
  • 4 pole
  • Full-load.amps: 23-21
  • 184T frame
  • Voltage: 208/230
  • Maximum speed: 1800 RPM
  • Shaft: 1-1/8"
Drop Ship Price: Vendors please log-in
Model Number: 0402 First AvailableThursday 13 September, 2007

M3 Panel Filters 10x20x1 (24-Pack)
 M3 Panel Filters 10x20x1  (24-Pack)

· Aggressive tackifier on final layer traps and holds dirt particles

· Self sealing design prevents air by-pass that lowers efficiency

· Three stage filtration

· Galvanized internal 9 gauge wire ring frame

· Replaces pleats and fiberglass throwaways

· Designed for rugged and higher humidity residential/commercial/industrial applications.

The M-3 Panels & Links are constructed with a premium grade, 100% polyester fiber, 3 stage media. The M-3 features a dry open web on the air entering side serving as a first stage pre-filter, catching only the larger particles. Smaller particles are caught by the second ply of finer denier fibers. The final layer is a tightly needled matrix treated with a non-migrating tackifier to catch and hold the smallest particles.

BENEFITS:

These filters are treated with an aggressive tackifier which is sticky to the touch, but will not transfer to hands, clothing, or coils. They also offer the additional advantage of being linkable. The self-sealing, friction fit frames can often eliminate the need for extra mounting hardware. The 100% polyester filters will not absorb moisture

and are designed for normal to humid HVAC systems.

APPLICATIONS:

The M-3 Panels & Links are designed for use in residential, commercial and industrial applications requiring higher levels of performance. These filters are also used extensively in paint booths to clean incoming air before it reaches the spraying surface. The M-3 Panels are highly effective in typical HVAC applications and as a pre-filter to high efficiency filters.

FEATURED BENEFITS:

3 STAGE FILTRATION Three stage design allows finer particles to load deep into the filter and become trapped in the tackified third stage. Increased life and efficiency.

9 GAUGE GALVANIZED Designed for all applications. WIRE FRAME prevents additional particles in the air stream caused by non coated wires.

PANEL CONFIGURATION Eliminates dirty air by-pass by self sealing in

filter tracks.

100% POLYESTER FIBERS Designed for normal or humid HVAC systems.

Will not absorb moisture like cotton fibers found in pleat filters. Will not shed like some glass fibers.

Drop Ship Price: Vendors please log-in
Model Number: 0460 First AvailableTuesday 02 October, 2007

M3 Panel Filters 12x20x1 (24-Pack)
 M3 Panel Filters 12x20x1  (24-Pack)

· Aggressive tackifier on final layer traps and holds dirt particles

· Self sealing design prevents air by-pass that lowers efficiency

· Three stage filtration

· Galvanized internal 9 gauge wire ring frame

· Replaces pleats and fiberglass throwaways

· Designed for rugged and higher humidity residential/commercial/industrial applications.

The M-3 Panels & Links are constructed with a premium grade, 100% polyester fiber, 3 stage media. The M-3 features a dry open web on the air entering side serving as a first stage pre-filter, catching only the larger particles. Smaller particles are caught by the second ply of finer denier fibers. The final layer is a tightly needled matrix treated with a non-migrating tackifier to catch and hold the smallest particles.

BENEFITS:

These filters are treated with an aggressive tackifier which is sticky to the touch, but will not transfer to hands, clothing, or coils. They also offer the additional advantage of being linkable. The self-sealing, friction fit frames can often eliminate the need for extra mounting hardware. The 100% polyester filters will not absorb moisture

and are designed for normal to humid HVAC systems.

APPLICATIONS:

The M-3 Panels & Links are designed for use in residential, commercial and industrial applications requiring higher levels of performance. These filters are also used extensively in paint booths to clean incoming air before it reaches the spraying surface. The M-3 Panels are highly effective in typical HVAC applications and as a pre-filter to high efficiency filters.

FEATURED BENEFITS:

3 STAGE FILTRATION Three stage design allows finer particles to load deep into the filter and become trapped in the tackified third stage. Increased life and efficiency.

9 GAUGE GALVANIZED Designed for all applications. WIRE FRAME prevents additional particles in the air stream caused by non coated wires.

PANEL CONFIGURATION Eliminates dirty air by-pass by self sealing in

filter tracks.

100% POLYESTER FIBERS Designed for normal or humid HVAC systems.

Will not absorb moisture like cotton fibers found in pleat filters. Will not shed like some glass fibers.

Drop Ship Price: Vendors please log-in
Model Number: 0461 First AvailableTuesday 02 October, 2007

M3 Panel Filters 12x24x1 (24-Pack)
 M3 Panel Filters 12x24x1  (24-Pack)

· Aggressive tackifier on final layer traps and holds dirt particles

· Self sealing design prevents air by-pass that lowers efficiency

· Three stage filtration

· Galvanized internal 9 gauge wire ring frame

· Replaces pleats and fiberglass throwaways

· Designed for rugged and higher humidity residential/commercial/industrial applications.

The M-3 Panels & Links are constructed with a premium grade, 100% polyester fiber, 3 stage media. The M-3 features a dry open web on the air entering side serving as a first stage pre-filter, catching only the larger particles. Smaller particles are caught by the second ply of finer denier fibers. The final layer is a tightly needled matrix treated with a non-migrating tackifier to catch and hold the smallest particles.

BENEFITS:

These filters are treated with an aggressive tackifier which is sticky to the touch, but will not transfer to hands, clothing, or coils. They also offer the additional advantage of being linkable. The self-sealing, friction fit frames can often eliminate the need for extra mounting hardware. The 100% polyester filters will not absorb moisture

and are designed for normal to humid HVAC systems.

APPLICATIONS:

The M-3 Panels & Links are designed for use in residential, commercial and industrial applications requiring higher levels of performance. These filters are also used extensively in paint booths to clean incoming air before it reaches the spraying surface. The M-3 Panels are highly effective in typical HVAC applications and as a pre-filter to high efficiency filters.

FEATURED BENEFITS:

3 STAGE FILTRATION Three stage design allows finer particles to load deep into the filter and become trapped in the tackified third stage. Increased life and efficiency.

9 GAUGE GALVANIZED Designed for all applications. WIRE FRAME prevents additional particles in the air stream caused by non coated wires.

PANEL CONFIGURATION Eliminates dirty air by-pass by self sealing in

filter tracks.

100% POLYESTER FIBERS Designed for normal or humid HVAC systems.

Will not absorb moisture like cotton fibers found in pleat filters. Will not shed like some glass fibers.

Drop Ship Price: Vendors please log-in
Model Number: 0462 First AvailableTuesday 02 October, 2007

M3 Panel Filters 14x20x1 (24-Pack)
 M3 Panel Filters 14x20x1  (24-Pack)

· Aggressive tackifier on final layer traps and holds dirt particles

· Self sealing design prevents air by-pass that lowers efficiency

· Three stage filtration

· Galvanized internal 9 gauge wire ring frame

· Replaces pleats and fiberglass throwaways

· Designed for rugged and higher humidity residential/commercial/industrial applications.

The M-3 Panels & Links are constructed with a premium grade, 100% polyester fiber, 3 stage media. The M-3 features a dry open web on the air entering side serving as a first stage pre-filter, catching only the larger particles. Smaller particles are caught by the second ply of finer denier fibers. The final layer is a tightly needled matrix treated with a non-migrating tackifier to catch and hold the smallest particles.

BENEFITS:

These filters are treated with an aggressive tackifier which is sticky to the touch, but will not transfer to hands, clothing, or coils. They also offer the additional advantage of being linkable. The self-sealing, friction fit frames can often eliminate the need for extra mounting hardware. The 100% polyester filters will not absorb moisture

and are designed for normal to humid HVAC systems.

APPLICATIONS:

The M-3 Panels & Links are designed for use in residential, commercial and industrial applications requiring higher levels of performance. These filters are also used extensively in paint booths to clean incoming air before it reaches the spraying surface. The M-3 Panels are highly effective in typical HVAC applications and as a pre-filter to high efficiency filters.

FEATURED BENEFITS:

3 STAGE FILTRATION Three stage design allows finer particles to load deep into the filter and become trapped in the tackified third stage. Increased life and efficiency.

9 GAUGE GALVANIZED Designed for all applications. WIRE FRAME prevents additional particles in the air stream caused by non coated wires.

PANEL CONFIGURATION Eliminates dirty air by-pass by self sealing in

filter tracks.

100% POLYESTER FIBERS Designed for normal or humid HVAC systems.

Will not absorb moisture like cotton fibers found in pleat filters. Will not shed like some glass fibers.

Drop Ship Price: Vendors please log-in
Model Number: 0463 First AvailableTuesday 02 October, 2007

M3 Panel Filters 14x25x1 (24-Pack)
 M3 Panel Filters 14x25x1  (24-Pack)

· Aggressive tackifier on final layer traps and holds dirt particles

· Self sealing design prevents air by-pass that lowers efficiency

· Three stage filtration

· Galvanized internal 9 gauge wire ring frame

· Replaces pleats and fiberglass throwaways

· Designed for rugged and higher humidity residential/commercial/industrial applications.

The M-3 Panels & Links are constructed with a premium grade, 100% polyester fiber, 3 stage media. The M-3 features a dry open web on the air entering side serving as a first stage pre-filter, catching only the larger particles. Smaller particles are caught by the second ply of finer denier fibers. The final layer is a tightly needled matrix treated with a non-migrating tackifier to catch and hold the smallest particles.

BENEFITS:

These filters are treated with an aggressive tackifier which is sticky to the touch, but will not transfer to hands, clothing, or coils. They also offer the additional advantage of being linkable. The self-sealing, friction fit frames can often eliminate the need for extra mounting hardware. The 100% polyester filters will not absorb moisture

and are designed for normal to humid HVAC systems.

APPLICATIONS:

The M-3 Panels & Links are designed for use in residential, commercial and industrial applications requiring higher levels of performance. These filters are also used extensively in paint booths to clean incoming air before it reaches the spraying surface. The M-3 Panels are highly effective in typical HVAC applications and as a pre-filter to high efficiency filters.

FEATURED BENEFITS:

3 STAGE FILTRATION Three stage design allows finer particles to load deep into the filter and become trapped in the tackified third stage. Increased life and efficiency.

9 GAUGE GALVANIZED Designed for all applications. WIRE FRAME prevents additional particles in the air stream caused by non coated wires.

PANEL CONFIGURATION Eliminates dirty air by-pass by self sealing in

filter tracks.

100% POLYESTER FIBERS Designed for normal or humid HVAC systems.

Will not absorb moisture like cotton fibers found in pleat filters. Will not shed like some glass fibers.

Drop Ship Price: Vendors please log-in
Model Number: 0464 First AvailableTuesday 02 October, 2007

M3 Panel Filters 15x20x1 (24-Pack)
 M3 Panel Filters 15x20x1  (24-Pack)

· Aggressive tackifier on final layer traps and holds dirt particles

· Self sealing design prevents air by-pass that lowers efficiency

· Three stage filtration

· Galvanized internal 9 gauge wire ring frame

· Replaces pleats and fiberglass throwaways

· Designed for rugged and higher humidity residential/commercial/industrial applications.

The M-3 Panels & Links are constructed with a premium grade, 100% polyester fiber, 3 stage media. The M-3 features a dry open web on the air entering side serving as a first stage pre-filter, catching only the larger particles. Smaller particles are caught by the second ply of finer denier fibers. The final layer is a tightly needled matrix treated with a non-migrating tackifier to catch and hold the smallest particles.

BENEFITS:

These filters are treated with an aggressive tackifier which is sticky to the touch, but will not transfer to hands, clothing, or coils. They also offer the additional advantage of being linkable. The self-sealing, friction fit frames can often eliminate the need for extra mounting hardware. The 100% polyester filters will not absorb moisture

and are designed for normal to humid HVAC systems.

APPLICATIONS:

The M-3 Panels & Links are designed for use in residential, commercial and industrial applications requiring higher levels of performance. These filters are also used extensively in paint booths to clean incoming air before it reaches the spraying surface. The M-3 Panels are highly effective in typical HVAC applications and as a pre-filter to high efficiency filters.

FEATURED BENEFITS:

3 STAGE FILTRATION Three stage design allows finer particles to load deep into the filter and become trapped in the tackified third stage. Increased life and efficiency.

9 GAUGE GALVANIZED Designed for all applications. WIRE FRAME prevents additional particles in the air stream caused by non coated wires.

PANEL CONFIGURATION Eliminates dirty air by-pass by self sealing in

filter tracks.

100% POLYESTER FIBERS Designed for normal or humid HVAC systems.

Will not absorb moisture like cotton fibers found in pleat filters. Will not shed like some glass fibers.

Drop Ship Price: Vendors please log-in
Model Number: 0465 First AvailableTuesday 02 October, 2007

M3 Panel Filters 16x16x1 (24-Pack)
 M3 Panel Filters 16x16x1  (24-Pack)

· Aggressive tackifier on final layer traps and holds dirt particles

· Self sealing design prevents air by-pass that lowers efficiency

· Three stage filtration

· Galvanized internal 9 gauge wire ring frame

· Replaces pleats and fiberglass throwaways

· Designed for rugged and higher humidity residential/commercial/industrial applications.

The M-3 Panels & Links are constructed with a premium grade, 100% polyester fiber, 3 stage media. The M-3 features a dry open web on the air entering side serving as a first stage pre-filter, catching only the larger particles. Smaller particles are caught by the second ply of finer denier fibers. The final layer is a tightly needled matrix treated with a non-migrating tackifier to catch and hold the smallest particles.

BENEFITS:

These filters are treated with an aggressive tackifier which is sticky to the touch, but will not transfer to hands, clothing, or coils. They also offer the additional advantage of being linkable. The self-sealing, friction fit frames can often eliminate the need for extra mounting hardware. The 100% polyester filters will not absorb moisture

and are designed for normal to humid HVAC systems.

APPLICATIONS:

The M-3 Panels & Links are designed for use in residential, commercial and industrial applications requiring higher levels of performance. These filters are also used extensively in paint booths to clean incoming air before it reaches the spraying surface. The M-3 Panels are highly effective in typical HVAC applications and as a pre-filter to high efficiency filters.

FEATURED BENEFITS:

3 STAGE FILTRATION Three stage design allows finer particles to load deep into the filter and become trapped in the tackified third stage. Increased life and efficiency.

9 GAUGE GALVANIZED Designed for all applications. WIRE FRAME prevents additional particles in the air stream caused by non coated wires.

PANEL CONFIGURATION Eliminates dirty air by-pass by self sealing in

filter tracks.

100% POLYESTER FIBERS Designed for normal or humid HVAC systems.

Will not absorb moisture like cotton fibers found in pleat filters. Will not shed like some glass fibers.

Drop Ship Price: Vendors please log-in
Model Number: 0466 First AvailableTuesday 02 October, 2007

M3 Panel Filters 16x20x1 (24-Pack)
 M3 Panel Filters 16x20x1  (24-Pack)

· Aggressive tackifier on final layer traps and holds dirt particles

· Self sealing design prevents air by-pass that lowers efficiency

· Three stage filtration

· Galvanized internal 9 gauge wire ring frame

· Replaces pleats and fiberglass throwaways

· Designed for rugged and higher humidity residential/commercial/industrial applications.

The M-3 Panels & Links are constructed with a premium grade, 100% polyester fiber, 3 stage media. The M-3 features a dry open web on the air entering side serving as a first stage pre-filter, catching only the larger particles. Smaller particles are caught by the second ply of finer denier fibers. The final layer is a tightly needled matrix treated with a non-migrating tackifier to catch and hold the smallest particles.

BENEFITS:

These filters are treated with an aggressive tackifier which is sticky to the touch, but will not transfer to hands, clothing, or coils. They also offer the additional advantage of being linkable. The self-sealing, friction fit frames can often eliminate the need for extra mounting hardware. The 100% polyester filters will not absorb moisture

and are designed for normal to humid HVAC systems.

APPLICATIONS:

The M-3 Panels & Links are designed for use in residential, commercial and industrial applications requiring higher levels of performance. These filters are also used extensively in paint booths to clean incoming air before it reaches the spraying surface. The M-3 Panels are highly effective in typical HVAC applications and as a pre-filter to high efficiency filters.

FEATURED BENEFITS:

3 STAGE FILTRATION Three stage design allows finer particles to load deep into the filter and become trapped in the tackified third stage. Increased life and efficiency.

9 GAUGE GALVANIZED Designed for all applications. WIRE FRAME prevents additional particles in the air stream caused by non coated wires.

PANEL CONFIGURATION Eliminates dirty air by-pass by self sealing in

filter tracks.

100% POLYESTER FIBERS Designed for normal or humid HVAC systems.

Will not absorb moisture like cotton fibers found in pleat filters. Will not shed like some glass fibers.

Drop Ship Price: Vendors please log-in
Model Number: 0467 First AvailableTuesday 02 October, 2007

M3 Panel Filters 16x24x1 (24-Pack)
 M3 Panel Filters 16x24x1  (24-Pack)

· Aggressive tackifier on final layer traps and holds dirt particles

· Self sealing design prevents air by-pass that lowers efficiency

· Three stage filtration

· Galvanized internal 9 gauge wire ring frame

· Replaces pleats and fiberglass throwaways

· Designed for rugged and higher humidity residential/commercial/industrial applications.

The M-3 Panels & Links are constructed with a premium grade, 100% polyester fiber, 3 stage media. The M-3 features a dry open web on the air entering side serving as a first stage pre-filter, catching only the larger particles. Smaller particles are caught by the second ply of finer denier fibers. The final layer is a tightly needled matrix treated with a non-migrating tackifier to catch and hold the smallest particles.

BENEFITS:

These filters are treated with an aggressive tackifier which is sticky to the touch, but will not transfer to hands, clothing, or coils. They also offer the additional advantage of being linkable. The self-sealing, friction fit frames can often eliminate the need for extra mounting hardware. The 100% polyester filters will not absorb moisture

and are designed for normal to humid HVAC systems.

APPLICATIONS:

The M-3 Panels & Links are designed for use in residential, commercial and industrial applications requiring higher levels of performance. These filters are also used extensively in paint booths to clean incoming air before it reaches the spraying surface. The M-3 Panels are highly effective in typical HVAC applications and as a pre-filter to high efficiency filters.

FEATURED BENEFITS:

3 STAGE FILTRATION Three stage design allows finer particles to load deep into the filter and become trapped in the tackified third stage. Increased life and efficiency.

9 GAUGE GALVANIZED Designed for all applications. WIRE FRAME prevents additional particles in the air stream caused by non coated wires.

PANEL CONFIGURATION Eliminates dirty air by-pass by self sealing in

filter tracks.

100% POLYESTER FIBERS Designed for normal or humid HVAC systems.

Will not absorb moisture like cotton fibers found in pleat filters. Will not shed like some glass fibers.

Drop Ship Price: Vendors please log-in
Model Number: 0468 First AvailableTuesday 02 October, 2007

M3 Panel Filters 16x25x1 (24-Pack)
 M3 Panel Filters 16x25x1  (24-Pack)

· Aggressive tackifier on final layer traps and holds dirt particles

· Self sealing design prevents air by-pass that lowers efficiency

· Three stage filtration

· Galvanized internal 9 gauge wire ring frame

· Replaces pleats and fiberglass throwaways

· Designed for rugged and higher humidity residential/commercial/industrial applications.

The M-3 Panels & Links are constructed with a premium grade, 100% polyester fiber, 3 stage media. The M-3 features a dry open web on the air entering side serving as a first stage pre-filter, catching only the larger particles. Smaller particles are caught by the second ply of finer denier fibers. The final layer is a tightly needled matrix treated with a non-migrating tackifier to catch and hold the smallest particles.

BENEFITS:

These filters are treated with an aggressive tackifier which is sticky to the touch, but will not transfer to hands, clothing, or coils. They also offer the additional advantage of being linkable. The self-sealing, friction fit frames can often eliminate the need for extra mounting hardware. The 100% polyester filters will not absorb moisture

and are designed for normal to humid HVAC systems.

APPLICATIONS:

The M-3 Panels & Links are designed for use in residential, commercial and industrial applications requiring higher levels of performance. These filters are also used extensively in paint booths to clean incoming air before it reaches the spraying surface. The M-3 Panels are highly effective in typical HVAC applications and as a pre-filter to high efficiency filters.

FEATURED BENEFITS:

3 STAGE FILTRATION Three stage design allows finer particles to load deep into the filter and become trapped in the tackified third stage. Increased life and efficiency.

9 GAUGE GALVANIZED Designed for all applications. WIRE FRAME prevents additional particles in the air stream caused by non coated wires.

PANEL CONFIGURATION Eliminates dirty air by-pass by self sealing in

filter tracks.

100% POLYESTER FIBERS Designed for normal or humid HVAC systems.

Will not absorb moisture like cotton fibers found in pleat filters. Will not shed like some glass fibers.

Drop Ship Price: Vendors please log-in
Model Number: 0469 First AvailableTuesday 02 October, 2007

M3 Panel Filters 18x24x1 (24-Pack)
 M3 Panel Filters 18x24x1  (24-Pack)

· Aggressive tackifier on final layer traps and holds dirt particles

· Self sealing design prevents air by-pass that lowers efficiency

· Three stage filtration

· Galvanized internal 9 gauge wire ring frame

· Replaces pleats and fiberglass throwaways

· Designed for rugged and higher humidity residential/commercial/industrial applications.

The M-3 Panels & Links are constructed with a premium grade, 100% polyester fiber, 3 stage media. The M-3 features a dry open web on the air entering side serving as a first stage pre-filter, catching only the larger particles. Smaller particles are caught by the second ply of finer denier fibers. The final layer is a tightly needled matrix treated with a non-migrating tackifier to catch and hold the smallest particles.

BENEFITS:

These filters are treated with an aggressive tackifier which is sticky to the touch, but will not transfer to hands, clothing, or coils. They also offer the additional advantage of being linkable. The self-sealing, friction fit frames can often eliminate the need for extra mounting hardware. The 100% polyester filters will not absorb moisture

and are designed for normal to humid HVAC systems.

APPLICATIONS:

The M-3 Panels & Links are designed for use in residential, commercial and industrial applications requiring higher levels of performance. These filters are also used extensively in paint booths to clean incoming air before it reaches the spraying surface. The M-3 Panels are highly effective in typical HVAC applications and as a pre-filter to high efficiency filters.

FEATURED BENEFITS:

3 STAGE FILTRATION Three stage design allows finer particles to load deep into the filter and become trapped in the tackified third stage. Increased life and efficiency.

9 GAUGE GALVANIZED Designed for all applications. WIRE FRAME prevents additional particles in the air stream caused by non coated wires.

PANEL CONFIGURATION Eliminates dirty air by-pass by self sealing in

filter tracks.

100% POLYESTER FIBERS Designed for normal or humid HVAC systems.

Will not absorb moisture like cotton fibers found in pleat filters. Will not shed like some glass fibers.

Drop Ship Price: Vendors please log-in
Model Number: 0470 First AvailableTuesday 02 October, 2007

M3 Panel Filters 20x20x1 (24-Pack)
 M3 Panel Filters 20x20x1  (24-Pack)

· Aggressive tackifier on final layer traps and holds dirt particles

· Self sealing design prevents air by-pass that lowers efficiency

· Three stage filtration

· Galvanized internal 9 gauge wire ring frame

· Replaces pleats and fiberglass throwaways

· Designed for rugged and higher humidity residential/commercial/industrial applications.

The M-3 Panels & Links are constructed with a premium grade, 100% polyester fiber, 3 stage media. The M-3 features a dry open web on the air entering side serving as a first stage pre-filter, catching only the larger particles. Smaller particles are caught by the second ply of finer denier fibers. The final layer is a tightly needled matrix treated with a non-migrating tackifier to catch and hold the smallest particles.

BENEFITS:

These filters are treated with an aggressive tackifier which is sticky to the touch, but will not transfer to hands, clothing, or coils. They also offer the additional advantage of being linkable. The self-sealing, friction fit frames can often eliminate the need for extra mounting hardware. The 100% polyester filters will not absorb moisture

and are designed for normal to humid HVAC systems.

APPLICATIONS:

The M-3 Panels & Links are designed for use in residential, commercial and industrial applications requiring higher levels of performance. These filters are also used extensively in paint booths to clean incoming air before it reaches the spraying surface. The M-3 Panels are highly effective in typical HVAC applications and as a pre-filter to high efficiency filters.

FEATURED BENEFITS:

3 STAGE FILTRATION Three stage design allows finer particles to load deep into the filter and become trapped in the tackified third stage. Increased life and efficiency.

9 GAUGE GALVANIZED Designed for all applications. WIRE FRAME prevents additional particles in the air stream caused by non coated wires.

PANEL CONFIGURATION Eliminates dirty air by-pass by self sealing in

filter tracks.

100% POLYESTER FIBERS Designed for normal or humid HVAC systems.

Will not absorb moisture like cotton fibers found in pleat filters. Will not shed like some glass fibers.

Drop Ship Price: Vendors please log-in
Model Number: 0471 First AvailableTuesday 02 October, 2007

M3 Panel Filters 20x24x1 (24-Pack)
 M3 Panel Filters 20x24x1  (24-Pack)

· Aggressive tackifier on final layer traps and holds dirt particles

· Self sealing design prevents air by-pass that lowers efficiency

· Three stage filtration

· Galvanized internal 9 gauge wire ring frame

· Replaces pleats and fiberglass throwaways

· Designed for rugged and higher humidity residential/commercial/industrial applications.

The M-3 Panels & Links are constructed with a premium grade, 100% polyester fiber, 3 stage media. The M-3 features a dry open web on the air entering side serving as a first stage pre-filter, catching only the larger particles. Smaller particles are caught by the second ply of finer denier fibers. The final layer is a tightly needled matrix treated with a non-migrating tackifier to catch and hold the smallest particles.

BENEFITS:

These filters are treated with an aggressive tackifier which is sticky to the touch, but will not transfer to hands, clothing, or coils. They also offer the additional advantage of being linkable. The self-sealing, friction fit frames can often eliminate the need for extra mounting hardware. The 100% polyester filters will not absorb moisture

and are designed for normal to humid HVAC systems.

APPLICATIONS:

The M-3 Panels & Links are designed for use in residential, commercial and industrial applications requiring higher levels of performance. These filters are also used extensively in paint booths to clean incoming air before it reaches the spraying surface. The M-3 Panels are highly effective in typical HVAC applications and as a pre-filter to high efficiency filters.

FEATURED BENEFITS:

3 STAGE FILTRATION Three stage design allows finer particles to load deep into the filter and become trapped in the tackified third stage. Increased life and efficiency.

9 GAUGE GALVANIZED Designed for all applications. WIRE FRAME prevents additional particles in the air stream caused by non coated wires.

PANEL CONFIGURATION Eliminates dirty air by-pass by self sealing in

filter tracks.

100% POLYESTER FIBERS Designed for normal or humid HVAC systems.

Will not absorb moisture like cotton fibers found in pleat filters. Will not shed like some glass fibers.

Drop Ship Price: Vendors please log-in
Model Number: 0472 First AvailableTuesday 02 October, 2007

M3 Panel Filters 20x25x1 (24-Pack)
 M3 Panel Filters 20x25x1  (24-Pack)

· Aggressive tackifier on final layer traps and holds dirt particles

· Self sealing design prevents air by-pass that lowers efficiency

· Three stage filtration

· Galvanized internal 9 gauge wire ring frame

· Replaces pleats and fiberglass throwaways

· Designed for rugged and higher humidity residential/commercial/industrial applications.

The M-3 Panels & Links are constructed with a premium grade, 100% polyester fiber, 3 stage media. The M-3 features a dry open web on the air entering side serving as a first stage pre-filter, catching only the larger particles. Smaller particles are caught by the second ply of finer denier fibers. The final layer is a tightly needled matrix treated with a non-migrating tackifier to catch and hold the smallest particles.

BENEFITS:

These filters are treated with an aggressive tackifier which is sticky to the touch, but will not transfer to hands, clothing, or coils. They also offer the additional advantage of being linkable. The self-sealing, friction fit frames can often eliminate the need for extra mounting hardware. The 100% polyester filters will not absorb moisture

and are designed for normal to humid HVAC systems.

APPLICATIONS:

The M-3 Panels & Links are designed for use in residential, commercial and industrial applications requiring higher levels of performance. These filters are also used extensively in paint booths to clean incoming air before it reaches the spraying surface. The M-3 Panels are highly effective in typical HVAC applications and as a pre-filter to high efficiency filters.

FEATURED BENEFITS:

3 STAGE FILTRATION Three stage design allows finer particles to load deep into the filter and become trapped in the tackified third stage. Increased life and efficiency.

9 GAUGE GALVANIZED Designed for all applications. WIRE FRAME prevents additional particles in the air stream caused by non coated wires.

PANEL CONFIGURATION Eliminates dirty air by-pass by self sealing in

filter tracks.

100% POLYESTER FIBERS Designed for normal or humid HVAC systems.

Will not absorb moisture like cotton fibers found in pleat filters. Will not shed like some glass fibers.

Drop Ship Price: Vendors please log-in
Model Number: 0473 First AvailableTuesday 02 October, 2007

M3 Panel Filters 24x24x1 (24-Pack)
 M3 Panel Filters 24x24x1  (24-Pack)

· Aggressive tackifier on final layer traps and holds dirt particles

· Self sealing design prevents air by-pass that lowers efficiency

· Three stage filtration

· Galvanized internal 9 gauge wire ring frame

· Replaces pleats and fiberglass throwaways

· Designed for rugged and higher humidity residential/commercial/industrial applications.

The M-3 Panels & Links are constructed with a premium grade, 100% polyester fiber, 3 stage media. The M-3 features a dry open web on the air entering side serving as a first stage pre-filter, catching only the larger particles. Smaller particles are caught by the second ply of finer denier fibers. The final layer is a tightly needled matrix treated with a non-migrating tackifier to catch and hold the smallest particles.

BENEFITS:

These filters are treated with an aggressive tackifier which is sticky to the touch, but will not transfer to hands, clothing, or coils. They also offer the additional advantage of being linkable. The self-sealing, friction fit frames can often eliminate the need for extra mounting hardware. The 100% polyester filters will not absorb moisture

and are designed for normal to humid HVAC systems.

APPLICATIONS:

The M-3 Panels & Links are designed for use in residential, commercial and industrial applications requiring higher levels of performance. These filters are also used extensively in paint booths to clean incoming air before it reaches the spraying surface. The M-3 Panels are highly effective in typical HVAC applications and as a pre-filter to high efficiency filters.

FEATURED BENEFITS:

3 STAGE FILTRATION Three stage design allows finer particles to load deep into the filter and become trapped in the tackified third stage. Increased life and efficiency.

9 GAUGE GALVANIZED Designed for all applications. WIRE FRAME prevents additional particles in the air stream caused by non coated wires.

PANEL CONFIGURATION Eliminates dirty air by-pass by self sealing in

filter tracks.

100% POLYESTER FIBERS Designed for normal or humid HVAC systems.

Will not absorb moisture like cotton fibers found in pleat filters. Will not shed like some glass fibers.

Drop Ship Price: Vendors please log-in
Model Number: 0474 First AvailableTuesday 02 October, 2007

2 PK 500 WATT HALOGEN BULBS
 2 PK 500 WATT HALOGEN BULBS
  • High quality for use with flood lamps, floor lamps and work lights
  • Double ended
  • 2000 hour life
  • 4-5/8" long

 

 

Drop Ship Price: Vendors please log-in
Model Number: 0658 First AvailableThursday 31 January, 2008

AZM 10 Piece LED Light Set
 AZM 10 Piece LED Light Set
  • Eight rectangular and and two swiveling oval LED lights
  • Peel and place for fast, easy installation without wiring or tools
  • Rectangular LED lights have separate magnet sensor
  • Ideal for drawers, cupboards, cabinets, closets, and shelves


Button cell batteries installed on all lights. Rectangular light dimensions: 2-1/2" L x 1-3/16" W x 7/8" H; Oval light dimensions: 1-7/8" L x 1-1/2" W x 1-5/16" H

 

Drop Ship Price: Vendors please log-in
Model Number: 0833 First AvailableTuesday 30 September, 2008

AZM 5-LIGHT FLOOR LAMP
 AZM 5-LIGHT FLOOR LAMP

A true design statement where Form meets Function is this stylish 5-light floor lamp. Constructed of sturdy iron that's tastefully finished in sleek satin nickel, this lamp is sure to add urban illumination to your room setting.

  • Satin nickel finish
  • Dimmer switch
  • Iron construction
  • Uses 5 medium base bulbs, 40 watt max. (not included)
Drop Ship Price: Vendors please log-in
Model Number: 0456 First AvailableSunday 30 September, 2007

AZM BLACK MATTE FLOOR LAMP
 AZM BLACK MATTE FLOOR LAMP

 

FLOOR LAMP

  • MATTE BLACK FINISH
  • PLASTIC SHADE
  • 3-WAY SOCKET
  • USES 150W TYPE A BULB (NOT INCLUDED)
  • Assembled Depth (In Inches): 11.5 In.
  • Assembled Height (In Inches): 71.5 In.
  • Assembled Width (In Inches): 11.5 In.
Drop Ship Price: Vendors please log-in
Model Number: 0449 First AvailableSunday 30 September, 2007

AZM BRONZE FLOOR LAMP
 AZM BRONZE FLOOR LAMP

This traditionally styled floor lamp adds a historical elegance to any room. It features oil rubbed bronze finish on its well-designed base and tan silk shade to finish it off. Create a warm, inviting ambiance with this distinctive piece.

  • Oil Rubbed Bronze Finish
  • 57.27"H
  • Uses 1 x 100W Bulb (Included)
  • 3-Way Switch
Drop Ship Price: Vendors please log-in
Model Number: 0451 First AvailableSunday 30 September, 2007

AZM BRONZE PETITE TABLE LAMP
 AZM BRONZE PETITE TABLE LAMP

Brighten your room and show off your unique style with this elegant lamp. This profile fits well into any living area. This exquisite lamp shines with quiet elegance. English Bronze Finish, Cream Soft-Back Shade, Uses 1 Candelabra Bulb, 40 Watt Max. (Included), Assembled Dimensions: 9" W x 16" H

  • English Bronze Finish
  • Cream Soft-Back Shade
  • Uses 1 Candelabra Bulb, 40 Watt Max. (Included)
  • 9" W x 16" H
Drop Ship Price: Vendors please log-in
Model Number: 0443 First AvailableSunday 30 September, 2007

AZM BRONZE TABLE LAMP
 AZM BRONZE TABLE LAMP

Add a touch of warmth to your home with this attractive traditional lamp that has a deep bronze finish giving it a deep metallic luster. This versatile lamp is perfect for any room in your house.

  • The rich metallic finish adds beauty to any room.
  • This versatile lamp is perfect on either end tables or night stands.
  • Topped with a matching finial for that extra touch of style.
  • 100 watt Max. 3-way bulb
Drop Ship Price: Vendors please log-in
Model Number: 0448 First AvailableSunday 30 September, 2007

AZM COMBO GOOSENECK FLOOR LAMP
 AZM COMBO GOOSENECK FLOOR LAMP

 

FLOOR LAMP WITH GOOSENECK READING LIGHT, SILVER FINISH, FROSTED PLASTIC SHADE FOR FLOOR LAMP AND READING LIGHT 3-WAY SOCKET FOR FLOOR LAMP, USES 100W TYPE A BULB (NOT INCLUDED), ON/OFF TURN-KNOB SWITCH, FOR READING LIGHT USES 60W TYPE A BULB (NOT INCLUDED)

  • SILVER FINISH
  • STEEL BASE
  • FLOOR LAMP WITH READING LIGHT
  • BULB NOT INCLUDED
  • Assembled Depth (In Inches): 11 In.
  • Assembled Height (In Inches): 71 In.
  • Assembled Width (In Inches): 11 In.
Drop Ship Price: Vendors please log-in
Model Number: 0450 First AvailableSunday 30 September, 2007

AZM EASY ON FLOOR LAMP
 AZM EASY ON FLOOR LAMP

Full Spectrum Floor Lamp. It is Black with Brush Nickel. It comes with a Foot Pedal for easy off and on. Full Spectrum reduces eye strain, and helps improve concentration. Render colors much more accurately for artist, knitters and needlepoint.

  • Full Spectrum Floor Lamp
  • Easy on/off Foot Pedal
  • 27W Bulb included
  • Great for crafters
Drop Ship Price: Vendors please log-in
Model Number: 0457 First AvailableSunday 30 September, 2007

AZM FULL SPECTRUM FLOOR LAMP
 AZM FULL SPECTRUM FLOOR LAMP

Emitting pure, glare-free white light, this innovative lamp simulates the full spectrum of natural light from the sun, making it a healthy option for office work, reading, hobbies and crafts. Its height is adjustable, so you can situate the light to best suit your needs. The lamp also uses less energy (bulb lasts up to 10,000 hours) and helps reduce eye strain and fatigue. Uses one 27W bulb (included). Antique brass finished steel. Height adjusts from 45 In. to 59 In.

  • Antique Brass finish
  • Uses less energy and helps reduce eye strain and fatigue
  • Uses one 27W bulb (included)
  • Height adjusts from 45 In. to 59 In.
Drop Ship Price: Vendors please log-in
Model Number: 0455 First AvailableSunday 30 September, 2007

AZM RESIN/METAL TABLE LAMP
 AZM RESIN/METAL TABLE LAMP

Beige straight sided silk look bell shade with piping included. Easy to assemble. UL listed.

  • TABLE LAMP
  • POLY RESIN BASE
  • THREE WAY SOCKET
  • 150 WATT TYPE A BULB(NOT INCLUDED)
Drop Ship Price: Vendors please log-in
Model Number: 0446 First AvailableSunday 30 September, 2007

AZM RUST LOOK FLOOR LAMP
 AZM RUST LOOK FLOOR LAMP

 

Rustic yet modern, these shapely iron light fixtures bring a touch of European flair to your home. Finished in rich monterrey rust, accented in a parchment shade. Bulbs are not included

  • Scrolled Body Floor Lamp
  • Monterrey Rust Finish
  • 3 Way Switch
  • Uses 1 x 150W Type A Bulb
  • Assembled Depth (In Inches): 17 In.
  • Assembled Height (In Inches): 60 In.
  • Assembled Width (In Inches): 17 In.
Drop Ship Price: Vendors please log-in
Model Number: 0458 First AvailableSunday 30 September, 2007

AZM RUST LOOK TABLE LAMP
 AZM RUST LOOK TABLE LAMP

 

Rustic yet modern, these shapely iron light fixtures bring a touch of European flair to your home. Finished in rich monterrey rust, accented in a parchment shade. Bulbs are not included

  • Scrolled Body Table Lamp
  • Monterrey Rust Finish
  • 3 Way Switch
  • Uses 1 x 150W Type A Bulb
Drop Ship Price: Vendors please log-in
Model Number: 0447 First AvailableSunday 30 September, 2007

AZM SWINGARM BRASS FLOOR LAMP
 AZM SWINGARM BRASS FLOOR LAMP

 

This beautiful Restoration Antique Brass Finish Makes this lamp a must for any traditional home.

  • Swing Arm Floor Lamp
  • Restoration Antique Brass Finish
  • Uses 150W Type A Bulb (included)
  • 3-Way: Yes
  • Assembled Depth (In Inches): 14 In.
  • Assembled Height (In Inches): 56.5 In.
  • Assembled Width (In Inches): 14 In.
  • Bulb Type: Incandescent
Drop Ship Price: Vendors please log-in
Model Number: 0453 First AvailableSunday 30 September, 2007

AZM SWINGARM FLOOR LAMP
 AZM SWINGARM FLOOR LAMP

Swingarm Floor Lamp

  • BRUSHED NICKEL FINISH
  • Bell Shade
  • 3-Way Socket
  • Uses 150W Type A Bulb (included)
Drop Ship Price: Vendors please log-in
Model Number: 0452 First AvailableSunday 30 September, 2007

AZM SWINGARM TABLE LAMP
 AZM SWINGARM TABLE LAMP

 

SWINGARM TABLE LAMP, RESTORATION ANTIQUE BRASS FINISH, STEEL BASE AND TUBING, FABRIC SHADE, 3-WAY SOCKET , USES 100W TYPE A BULB (INCLUDED)

  • SWINGARM TABLE LAMP
  • BELL SHADE
  • 3-WAY SOCKET
  • USES 100W TYPE A BULB (INCLUDED)
  • Depth (In Inches):   12 In.
  • Height (In Inches):   26.5 In.
  • Width (In Inches):   12 In.
     
Drop Ship Price: Vendors please log-in
Model Number: 0445 First AvailableSunday 30 September, 2007

AZM VENETIAN TABLE LAMP
 AZM VENETIAN TABLE LAMP

Venetian bronze table lamp with a soft back knock down shade 5 x 15 x 11, uses (1) 100 watt max type A 3 way bulb (sold separately), Assembled dimensions: 27.75" H x 15" W x 15"D

  • Venetian bronze finish
Drop Ship Price: Vendors please log-in
Model Number: 0444 First AvailableSunday 30 September, 2007
Displaying 1081 to 1140 (of 1687 products) Result Pages:[<< Prev]   1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  [Next >>]